What are the requirements for installing smart locks?
At present, smart door locks have entered thousands of households with their powerful and convenient functions, but many users often only focus on the appearance and quality of smart door locks, unaware that the installation of smart locks is also very important. Below, the editor will share with you several precautions for installing smart door locks.
01. When opening holes on the door frame, it is necessary to measure the distance between the hole to be opened and the edge of the door frame according to the thickness of the door (accurate measurement is required, otherwise the locking tongue will not be able to pop out and lock the door due to incorrect position, or the gap between the door seams will be too large, causing the door to swing back and forth slightly after locking, which will cause the door to feel less tightly closed).
02. Smart locks are products with technological attributes, and the usage environment of door locks plays an important role in their normal use, especially in environments with high levels of corrosive substances in dust or air, which will greatly affect the normal use of door locks. So it is recommended that you install the door lock after the room has been decorated, in order to facilitate the normal use of the door lock and extend its service life.
03. The installation of fingerprint door locks directly affects their normal use and service life. It is recommended that experienced personnel install them.
04. Due to the different opening methods of locks, the hole positions on the installation mold are also different. Therefore, before marking, it is necessary to determine which hole positions on the installation mold need to be opened based on the lock opening method.
05. After the installation and debugging of the door lock is completed, please register with the administrator in a timely manner. To facilitate your better use of the fingerprint door lock, we suggest that you backup and register a fingerprint or a set of passwords when registering fingerprints, so that you can open the door normally in case of accidental situations such as fingerprint wear and tear.
06. Wire connection: The wire connection must be ensured to be correct, and then the connecting wire should be placed properly to prevent it from being crushed or stuck by the ground pole, otherwise the door lock will not work properly.
07. For the convenience of opening the door, before installing the door lock, it is necessary to measure the distance between the lock and the ground according to the opening habits of family members.
*Originally from Intelligent Door Lock Research Pro, if involved in copyright issues, please contact us for prompt deletion.